Products / e.Dro salt water chlorinator radio socket

e.Dro salt water chlorinator radio socket

Control and manage the salt water chlorinator to treat the pool water

From
185,00€ excl. tax

Type

Socket

Relay

Description

Salt water chlorinator:

  • Control and manage the salt water chlorinator (compatible with all brands).
  • Wirelessly connect the salt water chlorinator to the e.Dro control box via the 100% secure e.Dro radio network.
  • Also available with the radio relay installed in the box, depending on the pump room configuration.

Salt water chlorinator features

-

Salt water chlorination

Power the salt water chlorinator (ON/OFF/Auto regulation).

Programming

Programme daily or weekly water treatment times.

Wintering mode

Set the salt water chlorinator to turn off at a certain temperature

Pool maintenance:

  • Power the salt water chlorinator (ON/OFF/Auto regulation).
  • Programme daily or weekly salt water chlorinator operation times.
    Configure the Redox regulation set point value
  • Wintering mode (stops salt water chlorination under a chosen temperature)
  • Polarity inversion and inversion time settings
  • Daily and monthly history of operation, power and Redox readings

Additional specifications

+
  • Compatible with all brands of salt water chlorinator
  • Radio socket size: 72 x 120 x 62 mm
  • Installation: Your ACWA Connect application provides guidance with step-by-step instructions throughout the equipment connection process.

FAQs

+

What does my pump room need for this to be installed?

This radio socket connects to the e.Dro system. So you will need an e.Dro control box to run the various connected pieces of equipment in relation to each other. The e.Dro salt water chlorinator radio socket only requires a dedicated wall socket halfway up the partition. It must have the capacity to run a 2 kW appliance.

How do I connect my salt water chlorinator to my e.Dro system?

Once your main e.Dro control box has been installed and synchronised with the ACWA Connect application, open the app and tap “Add equipment”. The app will guide you through the entire process.

e.Dro control box

The smart control box: coordinating the entire e.Dro system

e.Dro salt water chlorinator radio relay

Control and manage the salt water chlorinator to treat the pool water

Socket or relay

e.Dro Sense

The unit that communicates sensor and probe readings to the control box

e.Dro pH injection radio socket

Control and manage the pH injection pump

Socket or relay
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.